Industrial Technology

Machine Building

Ultra high temperature sealants from Henkel

Ultra high temperature sealants from Henkel

Specifically formulated for use in high temperature and high-pressure environments, Loctite NS 5540 and 5550 are sealing compounds that cure in the presence of heat to form a mechanical seal on metal-to-metal flanges and fittings. They are designed to allow for disassembly during routine maintenance and can also be used as a gasket dressing to extend the service life of traditional gaskets.

8th July 2020
Positek launches new in-cylinder mounted position sensor with integrated electronics

Positek launches new in-cylinder mounted position sensor with integrated electronics

Fulfilling the increased demand for accurate and robust position feedback in hydraulic and pneumatic instrumentation systems, Positek has launched a new line of competitively priced linear position sensors for in-cylinder mounting with fully integrated electronics. Positek´s new P116 series combine its patented LIPS (Linear Inductive Position Sensor) non-contact inductive technology and novel micro-electronic ASIC circuitry to provide a wide choice of electrical interface options in a compact and easily installed single sensor device that offers outstanding durability and reliability - plus high accuracy and stability over an exceptionally long working life. With calibrated travel and sensor length exactly matched for any cylinder measurement from 5 mm to 600 mm, the P116 can also be supplied as a drop-in replacement for other manufacturer´s in-cylinder position sensors.

8th July 2020
Variohm EuroSensor launches new range of glass and epoxy coated NTC bead thermistors

Variohm EuroSensor launches new range of glass and epoxy coated NTC bead thermistors

Expanding its wide range of temperature sensing components and devices, measurement specialist Variohm EuroSensor has launched a new range high sensitivity NTC thermistors in a choice of hermetically sealed glass or epoxy encapsulation. Manufactured from European sourced components, the high quality and competitively priced ENTC series is aimed at tight tolerance instrumentation tasks requiring outstanding reliability and/or where small temperature changes need accurate control.

8th July 2020
RS Components marks 10-year anniversary of DesignSpark with new resources

RS Components marks 10-year anniversary of DesignSpark with new resources

RS Components is celebrating 10 years of DesignSpark, the company’s online design engineering platform, with the introduction of brand new features for its website and a new design, to reflect the usability and functionality requirements of its 970,000+ community members. To mark its 10th anniversary, RS will be hosting a number of celebratory initiatives throughout the rest of 2020.

8th July 2020
Comau MATE is the first EAWS-certified (ergonomic assessment work-sheet) exoskeleton

Comau MATE is the first EAWS-certified (ergonomic assessment work-sheet) exoskeleton

Comau MATE is the first exoskeleton on the market to receive the EAWS (Ergonomic Assessment Work-Sheet) certification, which attests its effectiveness in reducing the “risk of biomechanical overload” of the upper limbs. Based on the evaluation system promoted by Ergo Foundation, Italy’s reference for the organization and measurement of work and ergonomics, the successful recognition studied workers who used MATE to perform daily tasks requiring flexion-extension of the arms. 

8th July 2020
High-performance disinfection - Blazar UVC lamps from Bolb

High-performance disinfection - Blazar UVC lamps from Bolb

Laser Components introduces Blazar from Bolb, a ready-to-use UVC lamp for surface disinfection. The unit is about the size of a handheld spotlight and emits 2.0WOpt of UVC radiation thanks to the combined powers of 25 Germicidal LEDs. A cone-shaped reflector provides a beam angle of 55 degrees.

7th July 2020
Rittal publishes review of five trends for data centres

Rittal publishes review of five trends for data centres

In the shift towards a smarter, more connected world, the number of demands being placed on IT are rising rapidly. Operators are seeking to satisfy a growing requirement for greater processing speeds, capacity and reliability across our IT networks and infrastructure.

7th July 2020
Phoenix Contact E-Mobility expands to Poland

Phoenix Contact E-Mobility expands to Poland

Phoenix Contact E-Mobility is expanding its production capacity with a new facility in Poland. The 15,000 m² plant at the Science and Technology Park Rzeszów-Dworzysko will be built by full-service industrial real estate developer Panattoni. The new facility is set to be completed by the end of 2020/start of 2021.

7th July 2020
Laird Connectivity BL653 series modules now available from Mouser

Laird Connectivity BL653 series modules now available from Mouser

Mouser Electronics is now stocking the BL653 Series of modules from Laird Connectivity. Featuring a comprehensive range of configurable interfaces as well as an extended industrial temperature rating, the BL653 provides reliable Bluetooth 5.1 connectivity and support for NFC and 802.15.4 communication (Thread and Zigbee) for a range of Internet of Things (IoT) applications in industrial settings and other harsh environments.

6th July 2020
SKF factories to be carbon neutral by 2030

SKF factories to be carbon neutral by 2030

Since 2015, SKF has decreased its manufacturing carbon footprint by 36% and is already operating two carbon neutral factories. Now SKF has announced its aim to achieve a fully carbon neutral manufacturing footprint by 2030.

6th July 2020
PREVIOUS
NEXT
ABSSAC Ltd Pepperl+Fuchs GB Ltd Rotor Clip Limited AdaptTech Manufacturing Solutions Ruland Manufacturing Co Inc Lenze Ltd Acorn Industrial Services Ltd