Less complexity, fewer variants, more efficiency, more power and simpler, faster commissioning and maintenance that's what Lenze is promising with a revolutionary new magnetic motor driven roller (MDR) to support intralogistics customers, driving the future of conveying.
(See Lenze at MachineBuilding.Live, 2 October 2024, on stand 52)
The o450 MDR will integrate directly into existing conveyor systems and deliver an output of 115 watts, which Lenze says makes it more than twice as powerful as comparable systems on the market. Visitors to MODEX in Atlanta, USA (March 11 - 14, 2024 / booth #4224) and LogiMat in Stuttgart, Germany (March 19.-21, 2024 / hall 5 StandD67) can see this evolutionary product in action.
Due to the unique design, this motor has significantly lower copper and iron losses overall, which means that less heat is generated within the roller. This results in a positive effect regarding efficiency as cooler copper windings have lower resistance (and therefore lower copper losses).
The cooler magnets have a higher magnetic flux linkage and can therefore achieve the same torque with a lower current. Depending on the speed, the MDR would therefore fulfil efficiency classes IE7-IE9 and the customer saves up to 30 percent energy compared to conventional systems. The o450 from Lenze can handle up to 66 pounds (30 kg). Even at low speeds, it offers the full nominal torque, which is hugely advantageous for accelerating conveyed goods.
Motor driven roller with 24 V or 48 V
The motor transfers its rotational energy via its rotor directly to the conveyed goods or the conveyor belt. The motor is based on the Vernier principle and combines a 3-phase AC motor with a loss-free magnetic gearbox. A big advantage over a conventional drive system is that the motor roller operates at 24 V or 48 V, which means non-electricians can replace, maintain or install the roller.
Variances are also reduced by 85 percent with this gearless MDR. This minimises design resources while minimizing excess inventory in a warehouse. Competitors currently have up to ten different gear ratios in their portfolio, according to Lenze.
In addition, the cabling effort is also significantly reduced. While comparable products require cables for speed and temperature monitoring in addition to the power connection, the latter two are integrated into the roller of the Lenze o450.
6 Abbey Court
Priory Business Park
Priory Business Park
MK44 3WH
UNITED KINGDOM
+44 (0)1234 753200